CNC-Lathes N-Series
N10
Your benefits at a glance:
- modular machine design for efficient 2-axis and 4-axis shaft machining or chuck-work machining with pick-up spindle
- excellent fundamental accuracy and thermal stability as precondition for hard and precision machining
- prepared for automatic loading and unloading via gantry or integral loading device
- independent working area for simultaneous two step machining on left and right turning spindle
- lowering tailstock in combination with counter spindle
- In-process and post-process gauging strategies
Technical data
| Specification | N10 2-axes |
N10 LT 4-axes |
|
| Working area | |||
| Nominal length | mm | 900 / 1300 | 900 / 1300 |
| Swing over cross slide guide | mm | 560 | 560 |
| Main and counter spindle | |||
| Work spindle nose acc. To DIN 55026 | size | A6 | A6 |
| Work spindle bore | mm | 54 | 54 |
| Spindle diameter in front bearing | mm | 120 | 120 |
| Drive power 100% / 60% duty cycle | kW | 29 / 37,5 | 28 / 36 | 29 / 37,5 | 28 / 36 |
| Speed range | rpm | 0..5000 / 0..6000 | 0..5000 / 0..6000 |
| LH and RH tool drive unit | |||
| Rapid feed cross / longitudinal | m/min | 40 / 50 | 40 / 50 |
| LH and RH tool system | |||
| Tool acceptance to DIN 69880 | 30 / 40 | 30 / 40 | |
| Tool arrangement | axial / radial | axial / radial | |
| Tool positions | 12 | 12 / 12 | |
| Tailstock | |||
| Quill travel | mm | 130 | 130 |
| Quill diameter | mm | 110 | 110 |
| Quill centre | size | MK 4 | MK 4 |
| Clamping force | kN | 3...10 | 3...10 |